Description

Conformity to standard for safety & electromagnetic compatibility
IEC-60601-1-2:2001 Standard or IS-13450
Purpose
ICU Bed are required to be used in Intensive Care Unit for comfort of Patient & facilitate comfortable transfer to & from Emergency/ OT/ Ward etc. & also to carry out point of care process including Radio-logical procedure at bed side
Type of ICU Bed Actuator
Mechanical (Handle Operated)
Type of mechanism for functioning or controlling angular motion of bed part
Hydraulic mechanism (Manual)
Type of mechanism for functioning or controlling Height of bed
Super Smooth Crank Screw Mechanism
Number of section provided in Bed Top
4
Base frame and support frame should be fabricated using metallic square / rectangular section of adequate cross section and thickness to provide high structural strength and stability
Yes
Bed top perforated
Yes
Bed should have radio translucent top (X-Ray translucent)
No
Availabilty side panel/Side safety guard
Yes
Type of side panel
Swing Up Down type
Number of Side panel
4
Availability Head & Foot panel/Board
Yes
Shape of Head & Foot panel /Board
D-type
Type of Head & foot Panel
Detachable type
Material of head and foot panel
ABS (acrylonitrile-butadiene styrene)
Availability of good grip for head/foot or side panel
Yes
Slots for IV rod at four corners provided
Yes
Number of hooks provided in IV rod
4
Availability of rectangular telesccopic tube box housing for tension spring
NA for Super Smooth Crank Screw Mechanism & Hydraulic mechanism for height
Degree Angle & Height indicator shall be provided at both foot & head side
No
X-Ray film holder used from
One side
Type of X-Ray Film holder
Cassettle Based System
Power of motor in HP
N/A
Better quality bearing should be used
Yes
Avaiability of patient constraint belt provided on both side of bed
Yes
Availability of Noiseless, non rusting swivel castor wheel/ roller with for easy Mobility & Steering
yes
Facility of braking and locking mechanism provided in castor roller
Yes
Number of caster to which braking system provided
2
Availability Corner buffer in all four corner to protect patient from collision shock
Yes
Safe working load capacity of ICU bed in kg
150
Facility of instant non powered/mechanical CPR( Cardiopulmonary Resuscitation) release at the head end for emergency
Yes
Lilen Holder/Urine Bag holder provided
Yes
Accessory Rail Provided at all four side of bed
Yes
Mattress provided with ICU bed
Yes
ICU mattress must X-ray translucent
NA (If mattress is not provided)
Mattress foam of the Bed should be with Anti Microbial agent incorporated into all components that assists in Prohibiting growth of bacteria & fungi and easy to clean
Yes
Mattress shall be made of High resilient & bio-density foam
Yes
Mattress should be translucent to allow radiography using portable X-ray machines
Yes
Mattress should be made in cube cut design & independent cubes promote air flow to reduce moisture
Yes
Material for ICU Bed Mattress
PU Foam
Maximum thickness of Mattress in mm with tolerance of ? 2 mm
100
Approx foam Density for Head/sacrum in kg/m3 tolerance
40
Approx foam Density for Heel in kg/m3
30
Therapeutic Weight limit for mattress in kg
150
Operating temperature & humidity for ICU bed
10 -40 Deg C and relative humidity of 15-90%
Power Supply ( as appropriate fitted with Indian plug)
N/A for mechanical operated
Facility of Resettable overcurrent breaker shall be fitted for protection
N/A for handle operated
ICU Bed frame and top must be Rust Proof
Yes
Type of powder/Paint coating done to ICU Bed frame,top & side panel
Epoxy Polyester Coating 50-60 microns
ICU Bed should be made up of high quality metal, pretreated with materials providing good finish, scratch resistant, bacteriostatic coating
Yes
Process used for pre chemically treatment of metallic bed component
Dip tank processes
Facility of easily cleaning /maintenance to ICU Bed
Yes
Warranty
3 Year
Product instruction manual shall be supplied
Yes
Standard Tool Kit for maintenance and Trouble Shooting to be provided with ICU bed
Yes
Demonstration of working to be provided after completing supplies before Acceptance
Yes
Material for the frame of bed
MS
Material for side railing/ Side Safety guard
ABS Plastic
Material for Head & Foot Panel/Board
ABS Plastic
Material for Bed top Section
ABS Plastic
Material of wheels
Polyester
Material for IV rod with chromium plated
SS
Maximum Adjustable Back Rest Angle in Degree
0-70
Maximum Adjustable Knee Rest Angle in Degree
0-40
Diameter of Castor Roller
130-150 mm
Maximum Trendlenburg Angle in Degree with tolerance ?2 degree
20
Maximum Reverse Trendlenburg Angle in Degree with tolerance ? 2 degree
10
Maximum Reverse Trendlenburg Angle in Degree with tolerance ? 2 degree
10
Bed height adjustibility range in mm
500-900
Mean coil diameter of tension spring used in counter weight mechanism in mm
N/A for Super Smooth Crank Screw Mechanism & Hydraulic mechanism for height
Spring coil diameter used in counter weight mechanism in mm
N/A for Super Smooth Crank Screw Mechanism & Hydraulic mechanism for height
Clearance between Bed Base frame and Floor surface in mm
150
Length of bed in mm with 2% tolerance
220-2300
Width of bed in mm with 2% tolerance
950-1000
Weight of ICU Bed
150 kg
Spares IV Rods supplied
1
Electric Shock Protection level-Class-B/class-1
NA for handle operated